iTube 302 Valve Amplifier
Filling any room with 30 watts of superlative sonic quality, the iTube 302 redefines your expectations.
The iTube 302 is a Class AB push-pull amplifier featuring the new FatDock enabling the user to stream music wirelessly from dock to amplifier. One may also use a wired connection on the RCA pair on the back of the dock direct into the amplifier if preferred.
Delivering 30W per channel this is an amp that will fill any room, large or small, with high-quality musical sound reproduction. As with all Fatman amps the iTube 302 gives any type of music a warmth and spatial quality that will give your favourite tracks a whole new lease of life.
Feed your senses. Warms.
FatDock
The FatDock will work with any iPod or iPhone and will stream music wirelessly (up to a range of 15m) to your iTube 302 Amplifier or if you like, any existing hi-fi amplifier (with a suitable 3.5mm or 2x RCA input).
Remote
The iTube 302 comes complete with a full function remote control (controls FatDock only).
Main Features
- Vacuum Tube Amplifier with FatDock for Apple iPod or iPhone
- 30 watts of superlative sonic quality
- Valve processing gives warm, rich, audio characteristics
Specifications
- Power Output: 30Wx2
- Frequency Response: 20Hz - 20KHz (±1.0Db)
- Distortion: ≤0.1%
- Signal-To-Noise Ratio: ≥90Db
- Input Sensitivity: 250mV
- Input Impedance: 100KΩ
- Output Impedance: 4Ω, 8Ω
- Sub Out: Yes
- Source Inputs: 3xRCA Pair, 1x3.5mm Aux
- Tubes Used: 12AX7 x 3, 6L6G x 2
- Power Supply: AC100~120V/50~60Hz, AC220~240V/50~60Hz
- Dimensions: Amp (WxHxD) 370x162x285mm
- Dock (WxHxD) 155x130x123mm
- Weight 13KGs
- Amp Type Class AB Push Pull
iPod Compatibility
